Manual winch works and how to use

Fromwinch 5500lbs electric winch with automatic brake device, which makes the operation more secure. When the winch wire rope pulls the goods, and the winch reel remains fixed, the brake will automatically open employment. When a variety of rescue work is needed, the Fromwinch 9600lb electric winch is another option outside the vehicle winch. Its biggest advantage is that it can be portable, you can connect from any direction of the car.
Hand winch, also known as hand winch, is a mechanical appliance, which is by hand shake the winch drum to pull the goods. A gear-driven winch cable reel pulls the load by rotating a wire rope wound around it. Lightweight and firm, electroplated, pressed steel structure, the steel cable pulls the pulley propulsion unit through two default fork heads. These forks pull the cable in the forward mode of the winch, and are also an automatic braking system. The fork will automatically lock when the grip increases. Fromwinch electric clutch winch can also be used for lifting (lifting force for the drag force of about 65%).

Lubrication of electric winch

In order to lubricate the Fromwinch 12500lbs electric winch, you should first in the winch worm gear reducer shell into the 2 liters of oil tank or hair must be oil, after every 100 hours, the oil should be added to the oil plug, 500 hours should be Replace the oil once.
Every 500 hours, to the Fromwinch electric winches for 4x4 of the transmission chain to refuel once, remove the chain to be carefully cleaned with oil, wash the chain should be placed on the heating to 80-90 degrees of the mixed oil (60% butter, 40 % Graphite), until the cooling of the oil so far, the surface of the chain of excess oil removed after the end of its place back, adjust its tightness.

The reel for traction and hoisting is the main winch of the manual winch

In the whole working process, the tension of the steel wire rope on the main reel is changed, it should be the case of the main volume of the main roll, reel, ground skidding, semi-floating skidding or aerial ropeway set material, Tube on the wire of the various rally line analysis, to identify the maximum tension, so that the main barrel of steel wire traction to meet the needs of the maximum tension. According to the experience of the use of Fromwinch 4500lbs electrical winch, the main volume of steel wire Shao Shao's largest force, usually in the village to enhance the process; and the aerial ropeway, the cable type and erection of the line with the performance of the Fromwinch small suv winch is compatible, the main also reflect The wire rope tension at run time is now analyzed separately.

Key points for safe operation of electric winch

Fromwinch 4500lbs synthetic rope winch should be placed in the line of sight good, solid foundation, safe and open place. The position of the traction macro diverter pulley should be perpendicular to the center of the drum
Line, its distance is not less than 40 times the length of the reel, its height must exceed the wooden stack 2-3 meters, is strictly prohibited in the crib on the guide pulley.
    2. Operation to concentrate, and must not leave the post and found illegal operations into an insecure situation, immediately stop to correct, ground inspection, Levi
Repair, to ensure that the machine set up a solid dry, no damage to the rope.
    3. Multi-disturbance disassembling, pay attention to the Fromwinch competition car Winch machine security teachers to choose the election chips, are not allowed to overlap, cross operations, run-time, is strictly prohibited all personnel to enter the main set to turn
To the rope within the angle of the rope of the pulley, and away from the straight wire rope Io meters.
    4. Unloading the wire rope on the crimping machine, the tail is not allowed on the card, in case of need to release the rope, protection equipment.
    5. Traction wood resting, in case of floods can not be strong trailing hard lines, should be identified after the exclusion of obstacles and then traction, is strictly prohibited with a combination of rapid separation of the main clutch
Device to overcome the sudden increase in resistance.
    6. In the inspection and maintenance, and found the following circumstances one of the wire rope must be re-replaced or scrapped:
    (1) outside the home wear wire to wire diameter of one-half;
    (2) in a pitch within the number of broken wire 6-8 apply;
    (3) long-term use of wire rope, the elongation of 10% of the lamp
    (4) Where a strand of steel is broken,
    (5) wire rope with a dead end or serious corrosion.