Winch installation

The use of the winch must of course start with the installation. This step is not complicated, but it is the most important step, because it is directly related to the subsequent steps and the use of fromwinch electric winch 4x4 effect. The most important thing here is to pay attention to the status of the noose drum, before the start and the entire process must ensure that the use of a uniform winding twist. Specific installation process is as follows: 1, insert the remote control. Insert the remote control connector end into the fromwinch electric towing winch. 2, do not let the remote control hanging drape. If you are a driver, operating the remote control in the driver's seat, then the excess connection around the side mirrors in the car side, the work will be much more convenient. 3, pull the noose, with the remote control cable will release a little point and then open the winch installed on the side of the noose hook. 4, open the clutch. Be sure to turn on the hook and then turn the clutch on again. 5, hand-held noose hook. When the noose is pulled down from the drum, hold the hook with one hand, so that no matter how long it is pulled, it will not be able to reach the hook. 6, will be pulled to the fulcrum fulcrum, lock the clutch. At this point the fromwinch electric winch 3000lbs is ready.